Your go-to for all building
and landscaping materials

Euromix™ Cream Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high-quality sponge finish is required.
It can be applied by hand or by machine, in layers ranging from 2mm to 6mm at a time. Suitable for most substrates such as expanded polystyrene, aac, brickwork, masonry, afs, etc.

Euromix™ Cream is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials and is fully compliant with AS1530.1

Size: 20 KG

Euromix™ Render is a multipurpose, multi-subsrate render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) a
re to be applied and as a finish coat, where a high-quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 2mm to 6mm at a time.

Euromix™ Render is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials and is fully compliant with AS1530.1.

Size: 20 KG

Euromix™ Skim Coat Render is designed to be used as a finishing coat over base render or other finished surfaces. Euromix™ Skim Coat can be applied in thicknesses from 2 to 3mm and be floated to a smooth flat finish for painting or sponged to give an even textured finish like traditional sand and cement.

Euromix™ Skim Coat is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials and is fully compliant with AS1530.1.

Size: 20 KG

Euromix™ LWHB Render a full polymer render that can be applied by hand or machine, as a high build base coat over most substrates in a residential or commercial building.
Particularly suited to rectification of misaligned and/damaged substrates. High adhesion allows high build thicknesses due to special low weight fillers and chemicals.

Size: 15 KG

Euromix™ NPS Keycoat Render is a high strength full polymer render that can be applied by hand or machine, as a medium build base coat over difficult nonporous substrates,
like PVC, EPS, and Fibre Cement. Ideally suitable as a keycoat on difficult substrates where other renders cannot be used.

Size: 20 KG

Euromix™ FP Render is quick curing dry mix, full polymer render – no added bond required in mixing. Particularly suitable for application over sheet and panel substrates, like AAC, polystyrene (EPS), fibre cement (FC) and plaster-based materials. Euromix™ FP Render is also suitable for application over masonry substrates

Euromix™ FP Render is specifically designed to meet BCA (Building Code of Australia) standards for non-combustible building materials and is fully compliant with AS1530.1

Size: 20 KG

Euromix™ Bond is a liquid additive formulated to increase the adhesion, compressive and chemical strength of Euromix Renders such as Euromix Cream, Render, and Skim Coat. Bond is added to water in various ratios dependent on the type and condition of the substrate (to form a ‘gauge’). Refer to PDS for each product for correct ratios for substrates

Size: 20 L & 5 L

Most commonly used for drainage and Sydney Water specified, filling behind retaining walls and around agg lines and can also be used on driveways and footpaths

Most commonly used for drainage and Sydney Water specified, filling behind retaining walls and around agg lines and can also be used on driveways and footpaths

Most commonly used for drainage and Sydney Water specified, filling behind retaining walls and around agg lines and can also be used on driveways and footpaths

Roadbase DGB20 is compliant with RMS specifications and is an easy to use, highly compactible material. Commonly used as base course for main roads, high traffic areas, residential subdivisions, footpaths, and driveways

A recycled product, it is a great compacting material that can be used for driveways, footpaths and under concrete slabs

40-70mm recycled concrete aggregate is a freely draining crushed concrete. Particle sizes range between 40mm and 70mm. With larger particles, this aggregate is suitable for use as backfill to building sites, behind retaining walls, and all weather access areas

Ideal for compacting and for use as a free draining material, retaining wall backfill, backfill around subsoil lines, underneath and around pipes and slabs

A cost-effective alternative to blue metal that is ideal for compacting and for use as a free draining material, retaining wall backfill, backfill around subsoil lines, underneath and around pipes and slabs

A blend of course sand and aggregate to use in filling masonry blocks, post holes and concrete slabs. To use just add cement and water

• Ant capping
• Weepa holes
• Alligator ties
• Veneer tie
• Wall tie
• Expansion tie
• Stubby tie
• Frame ties
• Bricktor
• Hoop Iron

• Half stop end
• H block
• Full stop end
• Half height
• Clean out
• Dry pressed mixed commons
• Scratch face commons

• Bondcrete
• Ecocrete sika
• Bycol clear
• Bycol dark

• General purpose
• Concrete mix
• Rapid set concrete mix
• Lime
• Sand/cement
• Bitumen
• Pure white cement
• Off white cement
• Construction grout/uni grout
• Self level/level pro
• Low heat cement
• Rapid set sand cement
• Fondu cement
• Renderers clay

• DIY mesh
• Reinforced mesh
• Trench mesh
• Ligatures (stirrups)
• Stock bars
• Ute mesh

• Hydrochloric Acid
• Turpentine

• Conform
• Ableflex foamjoint

• Safety mesh yellow
• Post cap round yellow
• Builder’s shroud
• Shade cloth
• Steel fence posts
• Stakes

• Malthoid
• Alcor aluminium flashing
• Lead
• Polyproof DPC

• Bricklayers
• Concreters
• Tilers
• Pavers
• Steel Fixers
• Renderers

• Angle bars
• Concrete roof bearer
• Concrete standard lintel
• Flat bar
• Render bar
• T bar

• Flexipipe (ag line)
• Geotextile
• Drainage Cell
• Aqua block
• Corflut

We stock a wide range of personal protective equipment (PPE)

• Clear sealants
• Coloured sealants
• Liquid nails
• PVC glue
• PVC cleaners
• Flexible sealants
• Paintable sealants
• Duct tapes
• Gap fillers
• Silicone seals

• Weedmats
• Sausages
• Silt barriers

• Megapro
• Profile
• Promaxset
• Proset
• Tile spacers
• Tile wedges
• Welded mesh
• Chicken wire
• Packers
• Prolastic
• Tile glue

• Yellow flat free narrow
• Yellow flat free wide
• Blue steel tray
• Poly tray

A fine washed sand that is suitable for tiling and exterior rendering or for use around copper and electrical conduit

Newcastle Sand is a very fine washed sand which makes it perfect for rendering and tiling

Pale tan in colour this sand can meet many job specifications including concreting, paving, bedding and landscape applications. Washed and screened with hard durable grains, the sand has low silt content and is Australian Standard compliant

Yellow bush sand is used for general brick and block laying mortar mixes. Generally only used with Grey Cement to give a traditional mortar colour

A white coloured sand that is used for mixing up as mortar. Colour can be varied by mixing with either Grey Cement or Off-White Cement

Screened fill sand is a natural fill material for under concrete, backfilling, and pipe bedding

Supply to order.
Call us to discuss your needs

A popular naturally occurring, low maintenance covering. The pebbles come from rivers such as the Nepean, Hunter, Shoalhaven and others

A smooth pebble consisting of a mix of colours ranging from cream to yellow. It’s the ideal colour to complement sandstone walls and makes a striking contrast to plants foliage

A smooth pebble consisting of a mix of colours, (predominantly white). It’s the ideal colour to complement sandstone walls and makes a striking contrast to plants foliage

Natural quarry spec, road base, highly compatible and certified

Natural quarry spec, blue metal, dust, highly compatible and certified.

Decorative stones for walkways, rooftops, and garden beds

A fine, long lasting, rough dark, that comes from sawmill plants and is soft and easy to spread. Retains water, insulates soil

A fine, long lasting, golden chip, that comes from sawmill plants and is soft and easy to spread. Retains water, insulates soil

A long-lasting, rough-cut pine chip mulch that maintains its natural colour. Offers insulation while preventing evaporation and soil erosion

This decorative landscaping mulch helps prevent moisture loss in soil, maintains even soil temperature and suppresses weed growth making it deal for all landscaping needs

This free-draining, lightweight mix is suitable for all types of plants and contains organics, ash and compost. Use together with our Sub Planter

Can be used as an underlay or top dressing for turf and is mixed with either soil or sand to suit your specific requirements

Organic Garden Mix is a mixture that’s rich in organic matter. It is ideal for use as an all-purpose, rich organic blend, suitable for a wide range of plants

Premium Garden Mix is a mixture that’s rich in organic matter. It is ideal for use as an all-purpose, rich organic blend, suitable for a wide range of plants

Top Soil is the uppermost layer of soil, which is a highly organic material, that can be used to lay grass, make garden beds, borders, raised beds or as a base for lawns